Dodge Ram Remote Start Hood Ajar. 2012 ram 1500 5.7l v8 hood ajar indicator switch | rockauto. It only happens when its hot outside.
Its throwing up evic messages and errors about the remote starter.will these be saved in any sort of memory? When the hood is closed and properly latched, the latch mounted hood ajar switch is an open circuit. 2018 dodge grand caravan, weathertech digital fit front floor mats (transferred from 2017).
Table of Contents
So Since I've Bought This Car, There Have Been A Few Instances Where I Can't Get The Car To Remote Start.
The molded plastic switch body has an integral molded connector on one end containing two terminal pins. Full width front and rear. 2017 dodge grand caravan (totaled) 1996 ram (sold, i'll miss her)
Now, I'm Aware Of The Certain Things That Must Be Present For It To Be Able To Remote Start, Such As All The Doors, Hood, And Truck Being Closed, But Even With All That, I Still Have The Occasional Problem.
Weathertech digital fit floor mats. If you're sure the hood switch is what is inhibiting the remote start, you need to test continuity of the switch circuit from the bcm through the switch, to ground. 2014 ram 3500 6.7 remote start not working, new oem hood latch, batteries in fobs, no hood ajar message when hood in open or closed.
Before Hitting The Remote Start There Is About 9 Volts.
After hitting the remote start and waiting approx. All the parts your car will ever need. If determine if for sure the hood switch is your issue you will need to jump the two wires together.
2018 Dodge Grand Caravan, Weathertech Digital Fit Front Floor Mats (Transferred From 2017).
Still getting good ajar message. I have clipped off the female plug that connects to the switch and replaced it with a new female plug. When the hood is closed and properly latched, the latch mounted hood ajar switch is an open circuit.
It Only Happens When Its Hot Outside.
Not sure if this is relevant, but when i installed the factory unit years ago on my 2006, the hood switch was changed from on/off to hi/low to prevent installers from easily bypassing it. It allows you to turn on your truck without having to sit inside and manually turn the key. I'll hit the button twice, and i'll get one beep, as if i hit lock.